How To Install an Illuminated Mirror in the Bathroom - Work Procedure And Nuances

How to install an illuminated mirror in the bathroom - work procedure and nuances

The procedure and specifics for connecting mirrored cabinets and illuminated shelves depends on the type of lighting fixtures used in assembling the device. If the presence of lighting fixtures is provided by the manufacturer, you will not need a wiring diagram for the bathroom mirror lighting. You just need to follow the instructions included in the product packaging.

In the case of independent actions to supply a piece of furniture with lighting, you will have to work hard, but even this is quite within the capabilities of an attentive person who likes to make things for the home with his own hands.

Glowing cord or LED strip with electrical connection

If the backlight is already provided in the model, then all contacts and existing elements are protected from moisture. If you are installing your own mirror lighting, you should take care of this in advance. When installing with your own hands, ordinary tape is often used - it holds the LED strip well. But it is better to use self-adhesive models to avoid peeling under the influence of moisture.

To connect an LED strip or lighting cord to a 220 V power source, you will need a special unit that adapts the voltage and other indicators for adequate operation of light-emitting semiconductors. If you connect directly without a transformer, the LEDs will not withstand the voltage and will fail. If you do everything in accordance with the manufacturer’s recommendations, LED lamps will last much longer than fluorescent light sources or conventional incandescent lamps. The service life of semiconductor devices is 50 thousand hours or more.

Battery-powered LED lights

One of the simplest options in terms of connection. The manufacturer has already done everything for you; you just need to install the LED-illuminated mirror in place and insert the batteries into the compartment intended for them.

Among the rules are only the basic provisions for working with battery-powered devices:

do not use batteries of different capacities in the same compartment;

do not try to restore the functionality of batteries by heating, shock, etc.;

Place only batteries with the parameters specified by the manufacturer in the compartment.

All electrical wiring is already installed in the correct places, the lights will receive power as soon as the batteries are inserted and the power button is pressed. The LEDs themselves are a very advantageous option. Low power consumption, long service life and the ability to connect dimmers to a network are attractive aspects of devices based on light-emitting semiconductors. But battery-powered lighting is an intermediate solution, more suitable for decorative purposes or orientation lighting at night. If you need a more intense luminous flux rather than illumination, it is better to choose options powered from the mains.